Matt Black Wall-Mounted Basin Mixer | Concealed, 20 cm Square Spout

The matt black Luna concealed basin mixer is a wall-mounted tap with its brass body hidden in the wall, so only a slim cover plate, a single lever and a 20 cm square spout remain visible. Its multi-layer matt black finish makes a crisp, confident statement on the basin wall.

Against white marble, pale tiles and wooden details, the matt black Luna concealed basin mixer creates a sharp contrast that turns the slim square spout into the focal point of the room. In dark, monochrome bathrooms it blends into the surface for a calm, sophisticated look instead. It suits Scandinavian, Japandi and industrial interiors and lines up neatly with a black mirror frame, black towel rail and black shower mixer; above a white or stone-effect vessel basin the black spout reads as a simple graphic accent.

Because it delivers water from the wall, the matt black Luna concealed basin mixer needs no tap hole in the worktop and works with vessel and countertop basins, and it can be used over a kitchen sink as well as a bathroom basin. The 20 cm square spout directs the flow towards the centre of a vessel basin, and with the worktop left clear, wiping and cleaning are quicker. The single lever mixes hot and cold water with one hand, the ceramic cartridge gives a smooth action, and the aerator in the spout produces a soft, splash-free stream that helps save water.

Plan the plumbing before buying the matt black Luna concealed basin mixer: the body is connected to PPR hot and cold supply pipes and set into the wall by a plumber before tiling. The wall must be at least 55 mm thick, and a distance of 18–20 cm between spout and basin is recommended. As the spout is 200 mm long, work out how far the vessel basin sits from the wall accordingly. PPR pipes and fittings are not included. Since the supply lines have to be prepared inside the wall, this mixer is usually chosen for new or renovated bathrooms.

Leave the protective cover on the matt black Luna concealed basin mixer throughout installation so plaster, cement and building debris cannot damage the body. Once it is fitted, turn the water on and carry out a leak test, and only start tiling when you are sure the connections are sound. The box contains the concealed body with cover plate (control panel), the in-wall mounting box, the brass outlet pipe (spout) with aerator and the mounting hardware. In the long run only the ceramic cartridge behind the lever may need replacing, and it can be changed without disturbing the body in the wall.

Wipe the surface of the matt black Luna concealed basin mixer with a soft, damp cloth; do not use abrasive, acidic or chlorine-based cleaners. In hard-water areas limescale marks show more clearly on a dark finish, so drying it with a soft cloth after use keeps the matt black looking even. Clean limescale from the aerator regularly to keep the flow soft. Shipped quickly, backed by ALFAS.

Specifications: Product type: Concealed (in-wall) basin mixer Series: Luna Colour: Matt black Finish: Multi-layer matt black finish Body material: Brass Cartridge: Ceramic Control: Single lever, hot and cold mixing Installation: Wall-mounted, concealed Spout: Square, 200 mm Cover plate: 210 x 110 mm Lever projection from wall: 95 mm Lever width: 40 mm Aerator: Yes Minimum wall thickness: 55 mm Use: Bathroom basin, kitchen sink